Operating the VS-169TP 16x9 CAT 5 Matrix Switcher
23
23
Figure 12
shows the MATRIX STATUS display in the Follow Mode:
0
0
0
0
0
L
L
0
0
0
1
1
1
0
1
1
3
4
7
8
-
6
5
2
0
0
0
3
0
0
0
Figure 12: MATRIX STATUS Display in the Follow Mode
In the breakaway mode, you can select the output port from which the reply
will be returned, by pressing the RS-232 (Rx) front panel button in the
BREAKAWAY area, and then selecting the desired output (see
Section 9.7
9 Operating the VS-169TP 16x9 CAT 5 Matrix Switcher
).
This section describes how to:
•
Toggle inputs #1 and #2 between local and remote inputs (see
Section
9.1
•
Read the 7-segment displays (see
)
Section 9.3.1
•
Use the IN and OUT buttons (see
)
Section 9.3
•
Confirm settings (see
)
Section 9.4
•
Store and recall input/output configurations (see
)
Section 9.5
•
Lock the front panel (see
)
Section 9.6
•
Choose the audio-follow-video or the breakaway feature (see
)
Section 9.7
9.1
Switching Inputs #1 and #2 between local and remote
)
You can select the function of the IN 1 and IN2 front panel buttons to be either
local or remote (TP), via the four rear panel SELECT pushbuttons (items 18 and
19 in
Figure 2
).
The UXGA SELECT buttons define the VIDEO signal and the AUDIO/RS-232
SELECT buttons define the AUDIO and RS-232 signals. All four buttons switch
independently.
This setting can only be changed via these rear panel buttons and cannot be
changed from the front panel or any other interface command.
