KRAMER: SIMPLE CREATIVE TECHNOLOGY
Defining the VS-3232DVI 32x32 DVI Matrix Switcher
8
Table 3: VS-3232DVI 32x32 DVI Matrix Switcher Rear Panel Features
#
Feature
Function
21 AC Mains Power Unit
Fuse holder and power cord socket. Connect to the AC
mains supply
22
IN 1~4, 5~8, 9~12,
13~16
DVI
Connectors
INPUTS
Connect to the DVI video sources (1 to 16) (see
Section 6
23
)
IN 17~20, 21~24,
25~28, 29~32
DVI
Connectors
Connect to the DVI video sources (17 to 32) (see
Section 6
24
)
TEST
Module
Signal generator module for testing video outputs
25 RESOLUTION DIP-switches
Set the resolution for video generated by the Test module
(see
Section 10.2
26
)
RS-232
9-pin D-sub Port
Connects to the remote operation PC or remote controller
1
(see
Section 6.1
27
)
NET
Ethernet RJ-45 Connector
Connect to a PC or controller via the Ethernet LAN (see
Section 6.2
LINK
LED flashes when communication is active.
POWER
LED lights when the interface receives power
).
28
OUT 1~4, 5~8, 9~12,
13~16
DVI Connectors
OUTPUTS
Connect to the DVI video acceptors (1 to 16) (see
Section 6
29
)
OUT 17~20, 21~24,
25~28, 29~32
DVI
Connectors
Connect to the DVI video acceptors (17 to 32) (see
Section 6
30
)
PATTERN
Button
Press the button to change the video pattern generated by
the Test module (see
Section 10.3
31
)
33
DVI Test Module Output Connector Connect to one of the DVI video inputs to test video
transmission
4.1 Using the IR Transmitter
You can use the
RC-IR3
IR transmitter to control the machine via the built-in IR
receiver on the front panel.
1 If the unit is not the first unit in the line, connects to the RS-232 OUT 9-pin DB port of the previous unit in the line
