KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating Your Video Matrix Switcher
16
•
You save time as execution is immediate and actions require no user
confirmation
•
No protection is offered to correct an erroneous action
In the Confirm mode:
•
The TAKE button lights
•
You enter an action and then confirm it by pressing the TAKE button
•
Every action requires user confirmation, protecting against erroneous actions
•
Execution is postponed until you confirm the action
1
7.3.1 Toggling between the At Once and Confirm Modes
To toggle between the At Once and Confirm modes:
Note:
If the TAKE button is flashing you cannot toggle between the At Once and
Confirm modes. If the TAKE button is flashing, this indicates that an action is
currently pending confirmation.
1. Press TAKE to toggle between the At Once mode and the Confirm mode.
Actions now require user confirmation.
2. Press the lit TAKE button to toggle from the Confirm mode back to the At
Once mode.
Actions no longer require user confirmation and the TAKE button is no
longer lit.
7.3.2 Confirming a Switching Action
Actions only require confirmation in the Confirm mode.
To confirm a switching action:
1. Using the numeric keypad, enter an output-input combination.
The TAKE button flashes.
2. Press the flashing TAKE button to confirm the action.
The action is confirmed and the TAKE button lights.
7.4 Switching Actions
This section describes how to:
•
Switch one input to one output (see
Section 7.4.1
•
Switch several inputs to several outputs (see
)
Section 7.4.2
•
Turn off several outputs (see
)
Section 7.4.3
7.4.1 Switching one Input to one Output
)
To switch one input to one output:
1. Using the numeric keypad, enter the required output (in this example, 26).
The following is displayed:
1 Failure to press the TAKE button within half minute (the timeout) will abort the action
