Installing and Using the Test Module to Troubleshoot Video Problems
29
29
Figure 9
shows the Resolution DIP-switch both off (default).
Figure 9: Resolution DIP-switch
10.3 Setting the Pattern of the Generated Video
The Pattern button is used to set the pattern of generated video. There are 32
available patterns. Press the button repeatedly to cycle through the patterns.
10.4 Using the Test Module to Troubleshoot Video Problems
The test module may be used in a number of ways to isolate video problems.
The following examples are based on the signal paths shown in
Figure 10
and a
VS-3232DVI
device configured as follows:
•
32 inputs and 32 outputs
•
The test module is installed and configured (see
Section 10.1
•
33 configured inputs and 33 configured outputs (see
)
Section 9
)
Figure 10: Signal Paths for Isolating problems
