KRAMER: SIMPLE CREATIVE TECHNOLOGY
Defining the VS-3232DVI 32x32 DVI Matrix Switcher
6
Table 1: Front Panel VS-3232DVI 32x32 DVI Matrix Switcher Front Panel Features
#
Feature
Function
1
Double-
function
Selector
Buttons
Area
Menu
Buttons
ESC
Press to exit the current operation
2
EDID
Press to assign EDID channels
3
STO
1
Press to store the current setup in the a preset
4
ALL
1
Press to connect an input to all outputs
5
OFF
1
Press to turn off an output
6
RCL
1
Press to recall a preset
7
DELAY
Press to set the delay between confirming an action and the execution of the action
8
ENT
Press to complete the input-output setup when using a one-digit number instead of
two digits
2
Press to enter the options in a setup menu
.
9
IR Receiver LED
Infrared remote control sensor
10 Power Switch
Illuminated switch for turning the unit on or off
11 IR LED
Lights yellow when receiving commands from the IR remote control transmitter
12
TAKE
Button
Press to confirm actions (see
Section 7.3.2
13
)
MENU
Button
Press once to enable the ALL, OFF STO and RCL buttons (see
Section 8
).
Press again to enter the configuration menu (see
8.2
Section
When in a Menu, press to cycle through the menu items
).
14
LOCK
Button
Press and hold for approximately 2 sec to lock/unlock the front panel buttons (see
Section 7.5
15
)
BREAKAWAY
Button
Press to exit a Menu (see
Section 8
16
)
DEFAULT SETUP
Button
Press to recall the default setup (see
Section 7.4.5
17
)
OUTPUTS/INPUTS
LCD Display
Displays the outputs (upper row) switched to the selected inputs (lower row), (see
Section 7.1
Displays user interface messages and menus
).
Figure 2: VS-3232DVI Numeric Keypad
Table 2: Front Panel VS-3232DVI Numeric Keypad Labels
#
Feature
Function
18 ◄ (Backward)
Press to shift the sliding window to the right
3
19
1, 2, 3, 4, 5, 6, 7, 8, 9, 0
Numeric keypad, 1 to 0
20 ► (Forward)
Press to shift the sliding window to the left
3
1 This button is enabled and lights after pressing the MENU button
2 For example, to enter input 5, you can either press 05 or 5, ENT
3 Since the LCD display is large enough to show only 13 cross-points out of a total of 32
