Operating Your Matrix Switcher
KRAMER ELECTRONICS, LTD.
8
2. Press the appropriate MASTER button.
The MASTER # appears in the LCD
Matrix
Master
display
1
and the
SLAVE switches to the MASTER.
Note that:
Pressing a Slave # button and a Master # button, when the # is the same,
displays the message:
Impossible to connect the same MASTER and SLAVE
Pressing a Master # button before a Slave # button displays the message:
Assign SLAVE first
5.3 MENU Commands Sequence
Press the MENU button
2
to scan the range of commands, as follows:
Clear single SLAVE
YES -> #SLAVE, NEXT -> menu _
Clear single MASTER
YES -> #MASTER, NEXT -> menu _
Clear ALL connections
YES -> enter, NEXT -> menu _
Assign ALL to MASTER
YES -> #MASTER, NEXT -> menu _
Recall SETUP
YES -> #SLAVE, NEXT -> menu _
Store SETUP
YES -> #SLAVE, NEXT -> menu _
Exit ->MENU SETUP->ENTER
Figure 6: Sequence of MENU Commands
5.3.1
Clearing a Single Slave
Remove a single Slave to Master connection, by:
Replacing it with a new Slave to Master connection
3
, or
Deleting it
To delete a single Slave to Master connection, do the following:
1. Press the MENU button once.
The
Clear single SLAVE
screen appears.
1 Item 5 in Figure 3
2 Pressing a button, which is not relevant to the current MENU function, aborts the menu command
3 This automatically clears the previous connection
