VS-808TP - Connecting the VS-808TP
9
An audio source (for example, the audio output of a laptop) to the
Audio In 3.5mm mini jack
2. For a local video and audio acceptor connect:
The PC Out 15-pin HD (F) connector to the video input of the acceptor
(for example, an AV system)
The Audio Out 3.5mm audio jack to the audio input of the acceptor
3. For remote inputs and outputs:
Connect up to eight compatible TP transmitters (for example, the
TP-133
) to the TP INPUTS 1 to 8
Connect up to eight compatible TP receivers (for example, the
TP-134
)
to the TP OUTPUTS 1 to 8
Note:
The
TP-133
transmitter can be paired only with a
TP-134
receiver.
6.1
Connecting a Serial Data Source to the VS-808TP RS-232
Data Port
You can connect a serial data source to the
VS-808TP
via RS-232 to control
remote acceptors (for example, monitors).
The RS-232 data source is connected to the RS-232 (DATA) port. A null-modem
adapter is not required for this connection and a straight-through cable can be
used.
6.2
Connecting a Serial Controller to the VS-808TP
You can control the
VS-808TP
via one of three types of serial connections:
RS-232
RS-485
RS-422
Summary of Contents for VS-808TP
Page 2: ......
Page 11: ...VS 808TP Installing the VS 808TP in a Rack 7 5 Installing the VS 808TP in a Rack...
Page 34: ......
