VS-81H - Connecting the VS-81H
9
5
Connecting the VS-81H
To connect the
VS-81H
8x1 HDMI Switcher
(as illustrated in
Figure 3
), do the
following:
1. If
required:
Set the appropriate INPUTS to the DVD mode (see
Section 6.1
)
Acquire the EDID (see
Section 6.2
)
2. Connect the HDMI sources as follows:
You do not have to connect all the HDMI sources.
Alternatively, you can connect a PC to any of the inputs and set those inputs to the PC
mode (see
Section 6.1)
A multimedia player to INPUT 1
A set top box to INPUT 2
A DVD player to INPUT 6
A DVD player to INPUT 8
3. Connect the OUTPUT HDMI connector to an HDMI acceptor (for example, a
plasma display).
4. If required, connect a PC and/or controller to the RS-232 port (see
Section 6.3
) and/or the ETHERNET port (see
Section 6.4
).
5. Connect the power connector to the mains electricity (not shown in
Figure 3
).
Press an INPUT SELECTOR button (from 1 to 8) to choose the HDMI input to
route to the output.
Always switch off the power to each device before connecting it to your
VS-81H
. After connecting your
VS-81H
, connect its power and then
switch on the power to each device.
i
