30
31
EN
Small repairs - do it yourself
Warranty
Our warranty obligation is understood to exclusively cover material and
manufacturing defects, wear is not covered by warranty.
The machine is to be operated in conformity with this Operating manual.
The operating manual is deemed to be part of the warranty provisions.
This warranty shall only apply on condition of proper use of original-Kränzle
component parts and original-Kränzle replacement parts.
With regard to legal warranty claims, the limitation periods of the respective
countries shall apply.
In the event of any warranty claims, please have your accessories and purchase
voucher ready before contacting your local dealer or the nearest authorized
customer service point, which you can also fi nd in the internet under
www.kraenzle.com
.
In case of any modifi cations on the safety installations or in case of exceeding
the temperature and speed limit, any warranty claims shall become invalid - this
shall also apply to use of wastewater as well as any other faulty or inappropriate
operation of the machine.
Pressure gauge, nozzle, valves, sleeves, high pressure hose and spray equipment
are wear parts and are not covered by the warranty obligation.
Warranty
Problem
No water from nozzle although the high-pressure cleaner is running.
The pressure gauge shows full pressure.
Cause
Most likely the nozzle is blocked.
1.
Switch off the high-pressure cleaner.
Pull plug from the socket. Operate
safety trigger gun catch several times
to decrease the pressure.
2.
Remove safety trigger gun and Round
Cleaner UFO first, then rinse high-
pressure hose to remove possible
soiling. Check the water inlet strainer
for contamination.
5.
If the problem still exists, take wire
(paper clip) and push through nozzle
opening. If this procedure is not
successful, the nozzle has to be replaced.
3.
Turn the Round Cleaner UFO over,
so that the bottom is facing you.
4.
Unscrew the 2 nozzles from the
bracket on the cleaning rotor.
