23
Small repairs
do it yourself
No water from the nozzle but the gauge shows full pressure:
Most likely the nozzle is blocked.
The pressure gauge shows full pressure,
but from the nozzle comes only little water
or no water at all.
(Inside the pressure gauge is no water but
a filling with glycerin to damp the vibration
of the pointer.)
Proceeding:
Switch off the cleaner. Pull plug from the
socket. Operate gun seveal times to
decrease the pressure.
First unscrew gun and lance, then rinse
hose from any residues.
Check water inlet filter for soiling.
Pull plug from socket prior to starting any repair
work!
If the problem still exists, take wire (paper clip) and push cautiously through nozzle
opening.
If this procedure is not successful, the nozzle has to be dismantled and cleaned (from the
backside) or even replaced, if necessary.
Summary of Contents for quadro 1500 TS
