59
Adjusting the height of the flame
To increase the height of the flame, press and hold the button.
To reduce the height of the flame or put the stove into the standby mode,
press and hold .
The maximum height of the flame
To increase the burner to the maximum value, double-press the button. The
display shows the „
HI
” symbol.
Sleep timer
Enabling/Settings
1. Press and hold until you see the icon. The hours’ box will flash.
2. Enter a value using the and buttons.
3. To confirm, press . The minutes’ box will flash.
Standby or off mode
To make the unit switch to the standby mode, hold the button until the
main burner is extinguished.
To turn the device off, press . The control flame will be extinguished.
Before attempting to re-start the stove, wait 5 seconds.
Setting the minimum and maximum height of the flame
The minimum height of the flame
To reduce the burner flame to the minimum height, double- press the
button. The display shows the „
LO”
symbol
Summary of Contents for KOZA AB GAZ
