WIRELESS
ROUTER
150MBPS
ADSL2/2+
WIRELESS ROUTER 150MBPS ADSL2/2+ User
Guide
36
Action:
To filter wireless users by MAC Address, select
“
Allow Association
”
or
“
Deny
Association
”
the follow Wireless LAN station(s) association.
MAC Address:
Enter the MAC Address you wish to filter in the field.
Note:
For most users, it is recommended to use the default Wireless LAN Performance settings. Any
changes made to these settings may adversely affect your wireless network. Under certain
circumstances, changes may benefit performance. Carefully consider and evaluate any changes
to these wireless settings.
4.4 Advanced Setup
Choose
“
Advanced Setup
”
, you can see the next submenus:
Figure 4-22
Click any of them, and you will be able to configure the corresponding function.
4.4.1 Firewall
Choose
“
Advanced Setup
→
Firewall
” menu, and you will see the
next screen (shown in Figure
4-23).
Figure 4-23
Firewall:
Select this option can automatically detect and block Denial of Service (DoS)
attacks, such as Ping of Death, SYN Flood, Port Scan and Land Attack.
SPI:
If you enable SPI, all traffics initiated from WAN would be blocked, including DMZ,
Virtual Server, and ACL WAN side.
4.4.2 Routing
Choose
“
Advanced Setup
→
Routing
” menu, and you will see the
routing information in the next
36
Manual
www.kraun.it
Summary of Contents for 150Mbps ADSL2/2+
Page 17: ...14 Manual www kraun it ...