background image

Prior to Installation:

·

Inspect the sink prior to installation to make sure the sink has not been damaged during shipping.

·

Observe all plumbing and building codes according to your state requirements.

·

Additional floor and wall preparation may be required to avoid damaging the sink.

·

Make sure to purchase the correct cabinet for your farmhouse sink. Farmhouse base cabinets

should be 3" larger than the actual size of the sink.

·

Not recommended to be installed with laminate countertop.

3

For technical assistance or replacement parts, please contact Kraus

Customer Service and one of our representatives will be happy to help:

Toll-Free: 800-775-0703 or customerservice@kraususa.com

The step-by-step guidelines in the installation instructions are a general reference for installing a

Kraus Sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended to
install all Kraus products by hiring a licensed professional.

Tools you will need:

NOTE: Specialized tools may be necessary to install Kraus Granite Farmhouse
Sinks with countertop materials other than wood, marble or granite.

Phillips Screwdriver

Pencil

Tape Measure

Screwdriver

Level

Safety Goggles

Silicone Adhesive

Jig Saw

Acetone

Drill

ACETONE

Summary of Contents for 00846639051712
















Reviews: