2. SAFETY
©2014 Kraus Global Ltd.
Retail CNG Dispenser Manual
11
Always use proper thread lubricants and
sealant on tapered pipe threads.
Never turn a fitting body. Instead, hold
fitting body and turn the nut.
After completing any work on process gas
piping systems and its components,
always purge the system thoroughly with
a non-corrosive inert gas, such as
nitrogen, before introducing natural gas.
Ensure that you have not left any tools,
cleaning equipment, or any loose parts
inside the dispenser.
ADVICE
Never allow problems to go unreported. Both your company and supplier
will benefit from the full disclosure of all dispenser issues.
2.5 Leak test safety
Please observe the following guidelines before performing leak tests
on Kraus-manufactured CNG dispensers:
Ensure the area surrounding the
dispenser being serviced is closed off to
all customers and unauthorized
personnel. Use any appropriate barricade
and signage to ensure safety.
It is recommended that protective shields
be placed around potentially harmful
areas of the dispenser being serviced.
Service personnel must wear all
appropriate safety gear, such as helmets
with eye and/or facial protection and
body shields.
