52
4.3 Assembling the scaffold (mobile working platform)
Step 1
Place the 2 mobile stabilisers and 2
base braces on the ground in the
position they will be assembled.
Remove the locking screws and put
the open ends of the the base braces
over the mobile stabilisers as shown.
When doing so, make sure that there
is an approx. 70 cm gap between the
base braces. Once in place, the base
braces are the link between the two
stabilisers and make sure that the
scaffold will be vertical.
Step 2
Remove the wing screws from the cas-
tors and place the foot plates
over the castors’ threaded spindle.
Next, screw the wing screws back
into the threaded hole provided for
that purpose by a couple of turns.
