15
KRAUSMANN POWER TOOLS
7055
English |
EN
Wear ear defenders
Wear safety goggles
This tool has been checked by the manufacturer.
From the date of purchase by the final consumer,
a two year warranty for
amateur use
covers any
faulty material and manufacturing. The receipt or
invoice of purchase needs to be displayed in case
of a repair that is covered by the warranty. For
possible faults during the warranty period, you
should address your issue to the retail shop from
which the purchase was made.
6. Warranty
Terms of warranty
The tool has been used properly and for the
purpose for which it was purchased.
T
he tool presents a problem that is due to
faulty material and manufacturing.
Incapability of the tool to perform according
to the technical specs provided.
Damages are not covered by the warranty that are
due to causes such as:
W
ear due to improper use.
Partial or total disassembly.The tool’s shell
must be disassembled only by personnel
authorised by the official distributor.
Damage due to overloading.
Usage of incorrect or incompatible accessory.
B
ad maintenance from the operator or any
other third party.
W
ear that was induced by external factors or
rogue particles (dust, debris etc.)
W
ear due to non compliance with the instruc-
tions in this manual.
If, during the warranty period, there is a fault that
can not be repaired from the authorised service
department, the tool will be replaced without any
extra cost.
The warranty is valid only when:
Do not dispose of electrical
machines as unsorted municipal
waste, use separate collection
facilities.
Contact your local government
collection systems for informa-
tion regarding the collection systems available.
If electrical machines are disposed of in landfills
or dumps, hazardous substances can leak into
the groundwater and get into the food chain,
damaging your health and well-being. When
replacing old machines with new ones, the retailer
will be happy to take back your old machine for
disposal.
In case there is a need for a repair after the war-
ranty period has expired, we will provide the best
possible attention to repair the tool successfully.
8. Disposal
7. Repair / Servicing
9. Declaration of Conformity
Herewith declares that:
T
he
Cordless Drill
with
CODE:
7055
and distinctive title:
KWCD1703-12S
/
XH1350-
0400WG
under the brand
KRAUSMANN
(Description:
Impact drill, 12V, with soft grip, adjustable speed
0-400/0-1400min-1, adjustable ring for torque, left/right-
hand motion changeover switch, max. torque 22Nm,
2 functions: drilling & screwing, 10mm keyless chuck,
color box), is designed in conformity with provision of the
Directives 2014/30/EEC, 2006/42/EC and the following
manufacturing standards: EN60745-1:2009+A11:2010,
EN60745-2-1:2010, EN60745-2-2:2010, EN55014-
1:2006+A1:2009+A2:2011, EN55014-2:2015.
Y
ear in which “CE” marking was affixed: tool 2017, charger
2016
PAPADEAS S.A.
4-6 Iroon 1912 St., 13671, Acharne, Greece
Authorized Representative
Wear a dust mask
