KRAUSMANN 8711, Operation Manual

11

KRAUSMANN  POWER TOOLS

8711

English | 

EN

Electrical safety

Personal safety

tools create sparks which may ignite the 

dust or fumes.
Κeep children and bystanders away while 

operating a power tool. Distractions can 

cause you to lose control.

Power tool plugs must match the outlet. 

Never modify the plug in any way. Do 

not use any adapter plugs with earthed 

(grounded) power tools. Unmodified plugs 

and matching outlets will reduce the risk of 

electric shock.
Αvoid body contact with earthed or ground-

ed surfaces wuch as pipes, radiators, ranges 

and refrigerators. There is an increased risk 

of electric shock if your body is earthed or 

grounded.
Do not expose power tools to rain or wet 

conditions. Water enetring a power tool will 

increase the risk of electric shock.
Do not abuse the cord. Never use the cord 

for carrying, pulling or unplugging the 

power tool. Keep cord away from heat, oil, 

sharp edges or moving parts. Damaged or 

entangled cords increase the risk of electric 

shock.
When operating a power tool outdoors, use 

an extension cord suitable for outdoor use. 

Use of a cord for outdoor use reduces the 

risk of electric shock.

R

emove any adjusting key or wrench before 

turning the power tool ON. A wrench or a 

key left attached to a rotating part of the 

power tool may result in personal injury.
Do not overreach. Keep proper footing and 

balance at all times. This enables better 

control of the power tool in unexpected 

situations.
Dress properly. Do not wear loose clothing 

or jewellery. Keep your hair, clothing and 

gloves away from moving parts. Loose 

clothes, jewellery or long hair can be caught 

in moving parts.

I

f devices are provided for the connection 

of dust extraction and collection facilities, 

ensure these are connected and properly 

used. Use of these devices can reduce dust 

related hazards.

Stay alert, watch what you are doing and 

use common sense when operating a 

power tool. Do not use a power tool while 

you are tired or under the influence of 

drugs, alcohol or medication. A moment of 

distraction while operating power tools may 

result in serious personal injury.
Use safety equipment. Always wear eye 

protection. Safety equipment such as dust 

mask, non-skid safety shoes, hard hat, or 

hearing protection used for appropriate 

conditions will reduce personal injuries.
Αvoid accidental starting. Ensure the switch 

is in the off-position before plugging in. 

Carrying power tools with your finger on the 

switch or plugging in power tools that have 

the switch on invites accidents.

Do not force the power tool. Use the correct 

power tool for your application. The correct 

power tool will do the job better and safer 

for the purpose for which it was designed.
Do not use the power tool if the switch does 

not turn it ON and OFF. Any power tool 

that cannot be controlled with the switch is 

dangerous and must  be repaired.
Disconnect the plug from the power source 

before making any adjustments, changing 

accessories or storing power tools. Such 

preventative safety measures reduce the 

risk of starting the power tool accidentally.

S

tore idle power tools out of the reach of 

children and do not allow persons unfamil-

iar with the power tool or these instructions 

to operate the power tool. Power tools are 

dangerous in the hands of untrained users.

M

aintain power tools, check for misalign-

ment or binding of moving parts, breakage 

of parts and any other condition that may 

affect the power tools’ operation. If dam-

aged, have the power tool repaired before 

use. Many accidents are caused by poorly 

maintained power tools.

K

eep cutting tools sharp and clean. Properly 

maintained cutting tools with sharp cutting 

edges are less likely to bind and are easier 

to control.

Power tool use and care