KRAUSMANN U87020-00B, Operation Manual

4

U87020-00B

KRAUSMANN  POWER TOOLS

Work area safety

Keep work area clean and well lit. Cluttered 

benches and dark areas invite accidents.
Do not operate power tools in explosive 

atmospheres, such as in the presence of 

flammable liquids, gases or dust. Power 

tools create sparks which may ignite the 

dust or fumes.

Κ

eep children and bystanders away while 

operating a power tool. Distractions can 

cause you to lose control.

2. General safety regulations

Read carefully and understand all instructions before 

using the tool.

When using power tools, the following instructions must 

be followed to prevent hazards such as 

electric shock, fire 

and/or serious injury.

       WARNING:

Disconnect the plug from the power source before 

making any assembly, adjustments or changing 

accessories. 

Such preventative safety measures reduce 

the risk of starting the tool accidentaly.

Electrical safety

Personal safety

Power tool plugs must match the outlet. 

Never modify the plug in any way. Do 

not use any adapter plugs with earthed 

(grounded) power tools. Unmodified plugs 

and matching outlets will reduce the risk of 

electric shock.

Α

void body contact with earthed or ground-

ed surfaces wuch as pipes, radiators, ranges 

and refrigerators. There is an increased risk 

of electric shock if your body is earthed or 

grounded.
Do not expose power tools to rain or wet 

conditions. Water enetring a power tool will 

increase the risk of electric shock.
Do not abuse the cord. Never use the cord 

for carrying, pulling or unplugging the 

power tool. Keep cord away from heat, oil, 

sharp edges or moving parts. Damaged or 

entangled cords increase the risk of electric 

shock.
When operating a power tool outdoors, use 

Stay alert, watch what you are doing and 

use common sense when operating a 

power tool. Do not use a power tool while 

you are tired or under the influence of 

drugs, alcohol or medication. A moment of 

distraction while operating power tools may 

result in serious personal injury.

Use safety equipment. Always wear eye 

protection. Safety equipment such as dust 

mask, non-skid safety shoes, hard hat, or 

hearing protection used for appropriate 

conditions will reduce personal injuries.

Α

void accidental starting. Ensure the switch 

is in the off-position before plugging in. 

Carrying power tools with your finger on the 

switch or plugging in power tools that have 

the switch on invites accidents.
Remove any adjusting key or wrench before 

turning the power tool ON. A wrench or a 

key left attached to a rotating part of the 

power tool may result in personal injury.
Do not overreach. Keep proper footing and 

balance at all times. This enables better 

control of the power tool in unexpected 

situations.
Dress properly. Do not wear loose clothing 

or jewellery. Keep your hair, clothing and 

gloves away from moving parts. Loose 

clothes, jewellery or long hair can be caught 

in moving parts.
If devices are provided for the connection 

of dust extraction and collection facilities, 

ensure these are connected and properly 

used. Use of these devices can reduce dust 

related hazards.

Power tool use and care

an extension cord suitable for outdoor use. 

Use of a cord for outdoor use reduces the 

risk of electric shock.

Do not force the power tool. Use the correct 

power tool for your application. The correct 

power tool will do the job better and safer 

for the purpose for which it was designed.
Do not use the power tool if the switch does 

not turn it ON and OFF. Any power tool 

that cannot be controlled with the switch is 

dangerous and must be repaired.

English | 

EN