KRAUSMANN U87020-00B, Operation Manual

6

U87020-00B

KRAUSMANN  POWER TOOLS

failure.
Do not place batteries in a tool box or pock-

et with nails, screws, keys, etc. Fire or injury 

may result.

Have your power tool serviced by a 

qualified repair person using only 

genuine 

replacement parts. This will ensure that the 

safety of the power tool is maintained.
Follow instruction for lubricating and chang-

ing accessories.
Keep handles dry, clean and free from oil 

and grease.

Service

The KRAUSMANN

®

 UN1 POWER 20V 

battery can be used with all 20V 

power tools bearing this marking.

3. Specific safety regulations

6

4

3

8

10

11

12

13

14

9

accident. Check tightness of screws carefully 

before operation.
In cold weather or when the tool has not 

been used for a long time, let the tool warm 

up for a while by operating it under no load.

This will loosen up the lubrication.
A

lways be sure you have a firm footing. Be 

sure no one is below when using the tool in 

high locations.

Hold the tool firmly with both hands.
Κ

eep hands away from moving parts.

Do not leave the tool running. Operate the 

tool only when hand-held.
Do not point the tool at any one in the area 

when operating. Parts could fly out and injure  

somenone seriously.
Do not touch parts close to the bit immedi-

ately after operation; they may be extremely 

hot and could burn your skin.
Some material contains chemicals which 

may be toxic. Take caution to prevent dust 

inhalation and skin contact. Follow material 

supplier safety data.

Wear ear protectors. Exposure to noise can 
cause hearing loss.

U

se auxiliary handles supplied with the tool. 

Loss of control can cause personal injury. 

H

old power tools by insulated gripping sur-

faces when performing an operation where 

the cutting tool may contact hidden wiring 

or its own cord. Contact with a “live” wire will 

make exposed metal parts of the tool “live” 

and shock the operator.
W

ear a hard hat (safety helmet), safety 

glasses and/or face shield. Ordinary eye or 

sun glasses are NOT safety glasses. It is also 

highly recommended that you wear a dust 

mask and thickly padded gloves.

Β

e sure the bit is secured in place before 

operation.

U

nder normal operation, the tool is designed 

to produce vibration. The screws can 

come loose easily, causing a breakdown or 

DO NOT let comfort or familiarity with product 

(gained from repeated use) replace strict adher

-

ence to electric power tools’ safety rules. If you 

use this tool unsafely or incorrectly, you can suffer 

serious personal injury.

5

7

1

2

Additional safety regulations for 

angle grinders

Do not cut or grind light metals that contain 

over 80% magnesium as these types of met

-

als are flammable.

Do not use other accesosries apart from 

cutting and grinding discs. Make sure that the 

disc’s adjusted speed is equal or higher than 

the value that is inscribed on the plate.
D

o not cut pieces that require a maximum 

depth that is longer than the size of the disc. 

Make sure the disc has the correct dimen-

sions and matches properly on the axle.

U

se discs with great caution according to the 

instructions supplied with the disc.
Inspect the disc before use. Do not use bro-

ken or damaged discs.
M

ake sure the disc is fitted according to the 

instructions.
A

fter fitting the disc, operate the machine for 

a while under no load, in a safe place.
If the machine produces intense vibrations or 

you notice damage on the disc, turn off the 

English | 

EN