This manual identifies the qualifications of the personnel for the different scopes of work as listed
below:
Qualified personnel
Due to their specialised professional training, knowledge, and experience as well as knowledge of
the industry-specific standards and regulations, qualified personnel are in a position to perform
assigned tasks and to identify and avert potential risks on their own.
Specialised personnel
Due to their specialised professional training, knowledge, and experience as well as knowledge of
the industry-specific standards and regulations, qualified personnel are in a position to perform
assigned tasks and to identify and avert potential hazards on their own.
Trained electrician
Due to specialised professional training, knowledge and experience as well as knowledge of the
industry specific standards and regulations, a trained electrician is able to carry out work on the
electrical systems and to identified and avert potential risks on his/her own.
The trained electrician has completed specialised training for the specific work environment where
he/she works and knows the relevant standards and regulations.
User
The user is familiar with the basic regulations on occupational safety and accident prevention.
2.3 Personal protective equipment
Personal protective equipment is used to protect persons from impacts on their occupational health
and safety.
The personnel must wear personal protective equipment while carrying out the different tasks and
while working with the device.
The selection of the protective equipment depends on the coating material that is used. To
ensure the proper selection of personal protective equipment, the information provided by the
spray material manufacturer indicated on the safety data sheet must be adhered to.
Description of the personal safety equipment recommended by Krautzberger
The personal safety equipment and clothing is described below:
Operating instructions
T-Dok-300-GB-Rev.1
mail@krautzberger.com, www.krautzberger.com
GB–8
