8
TIP:
For pools deeper than 2m, use an additional
weight at 4m – pull apart the fourth and fifth
hose sections, slide on the weight then reconnect.
Build the Ultra Flex Hose
Start with the male-male hose and twist on a female-male
length. Keep going until the hose is long enough to reach from
your skimmer box to the far corner of your pool plus around
1.5 metres extra – this will optimise the coverage of your VTX-C.
Attach the Hose Weight
Pull apart the second and third hose sections, slide on the weight
then reconnect the hose. The weight should sit approximately
2m from the end of the hose that connects to the VTX-C.
male
male
female
STEP
3
STEP
4
2m
TIP:
Wetting the hose ends in your pool will
make them easier to connect to each other.
NOTE:
If your cleaner tends to favour a corner
in the pool, remove one length.
male - male length
