Fit the Smart Skim Valve
Insert one of the supplied adaptor fittings, then
attach to your vacuum plate.
7
STEP
2
STEP
2
TIP:
For Poolrite Vacuum Plates, please ensure the first
thread adapter (with the taper top facing up) is screwed in
from the underside of the plate to sit flush with the bottom.
This will ensure the valve can operate efficiently.
TIP:
Depending on your vacuum
plate, you may have to
use a
different skim adaptor
– we’ve
included three to choose from.
You know you’re using the right
one
when there’s a tight fit.
See our website for help.
used with most
vacuum plates
used with Polyplastics
190 & 210 standard
used with Polyplastics
SK1000 (rectangular)
NOTE:
To remove,
ensure pump is off
and grasp from the base of
the Smart-Skim, pulling up. (Note: Not from the hose or spring).
OPTIONAL UPGRADE:
For superior vacuum control and surface
skimming, why not try our AutoSkim upgrade with custom vacuum
plate? (see page 12).
