2
Safety Precautions
WARNING
Before using a power tool with this product, read and follow the
tool manufacturer’s instructions and safety precautions in addition to the safety
precautions below to reduce the risk of serious injury from hazards such as fire,
electric shock, or rotating drill bit.
■
Always wear personal protective equipment recommended by the manufacturer of
the power tool you are using, such as eye, hearing, or respiratory protection.
■
The drill bit is sharp. Handle with care.
■
Do not allow familiarity gained from frequent use of your tools to replace safe
work practices. A moment of carelessness is sufficient to cause serious injury.
■
Avoid awkward hand positions where a sudden slip could cause contact with the
rotating bit.
■
When drilling, always ensure that the workpiece is clamped securely. It is
dangerous to hold the workpiece in place by hand.
WARNING
Do not operate this tool or any machinery while under the influence of
drugs, alcohol, or medications.
WARNING
This product can expose you to chemicals including Acrylonitrile and
other chemicals, which are known to the State of California to cause cancer and
reproductive harm. For more information go to www.P65Warnings.ca.gov.
Table of Contents
Safety Precautions . . . . . . . . . . 2
Pre-Assembly . . . . . . . . . . . . . 3
Product Description . . . . . . . . . 3
Onboard Tool Storage. . . . . . . . 4
Adjustable Clamp Pressure . . . . . 4
Extension Wings . . . . . . . . . . 5
Mounting Option . . . . . . . . . . 5
Dust Collection Accessories . . . . 6
Docking Station Assembly . . . . . . 7
Operation - Drilling Pocket Holes . 12
Operation - Drilling and Driving
Pocket-Hole Screws . . . . . . . . 17
Using Your Kreg Jig . . . . . . . . . 18
Removing the Jig from the Docking
Station . . . . . . . . . . . . . . . . 19
Removing a Kreg 700-Series Jig
from a Mounted Docking Station . 19
Removing a Kreg 700-Series Jig from
an Unmounted Docking Station. . 20
