background image

Summary of Contents for MP 9

Page 1: ... and tighten clamp mounting nuts Push speedometer shaft through the large center opening and the cable one each brown and grey red wire through the small laterally arranged opening in the housing bottom Fasten speedometer shaft top end via the cap nut and the two wires to the speedometer lamp Place housing top part on bottom part and press down Fasten cables not the Bowden cables direct behind the...

Page 2: ...ng with bulb socket onto the turn signal holder Fasten the tum signal glass Place turn signal holder from the rear against the taillight and fasten with one each spring lock washer and cap nut Push signal cable through luggage carrier guide Connect turn signal cables underneath the dual seat to the exposed cable ends of matching color 4 Mouting Rear Turn Signals WIP 19 5 Commissioning Tum Signal S...

Page 3: ...nce and tighten clamp mounting nuts Push speedometer shaft through the large center opening and the cable one each brown and grey red wire through the small lateraliy arranged opening in the housing bottom Fasten speedometer shaft top end via the cap nut and the two wires to the speedometer lamp Place housing top part on bottom part and press down Fasten cabies not the Bowden cabies direct behind ...

Page 4: ... into the housing und push housing with bulb socket onto the turn Signal holder Fasten the turn Signal glass 4 Mouting Rear Tum Signals WIR 19 Place turn signal holder from the rear against the Push signal cable through luggage carrier guide Connect turn signal cables underneath the dual seat to the exposed cable ends of matching color 5 Commissioning Tum Signal System MP 19 Power supply to the tu...

Reviews: