39
RC-5 Control
This function enables you to change the link transmit status of the Evolution 202.
The options are:
LINK TRANSMIT, LINK RECEIVE.
Enter the menu, then:
1.
Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select:
RC-5 CONTROL.
2.
Press the enter button on the preamplifier front panel or the enter key (6) on
the remote control
.
The front panel display (3) shows the default mode:
LINK
TRANSMIT
.
3.
Use the level control knob or the up and down keys to select the desired
option:
LINK TRANSMIT
or
LINK RECEIVE.
4.
Press the enter button or key to confirm the selection. The front panel display
reads:
RC-5 CONTROL.
Recall
This function enables you to access factory default settings or your own saved
settings, or to undo a clone. The options are:
FACTORY, SAVED.
Enter the menu, then:
1.
Use the level control knob on the preamplifier channel front panel or up and
down keys (14) on the remote control to select:
RECALL.
2.
Press the enter button on the preamplifier channel front panel or the or enter
key (6) on the remote control. The front panel display (3) shows the default
mode:
FACTORY
.
3.
Use the level control knob or the up and down keys to select the desired
option:
FACTORY,
or
SAVED.
4.
Press the enter button or key to confirm the selection. The front panel display
reads:
RECALL.
FACTORY
Recalls the factory settings.
SAVED
Recalls settings previously stored in memory using the
SAVE
function.
See also
Save, on the next page.
continued
