Main Menu, Navigation and Setup Cont...
Dynamic Range – Limits the dynamic content by compressing the audio signal. This setting
limits the lfe and bass information in particular allowing higher playback levels with less
dynamic contrast. This function is most helpful when used at night making it easier not to
disturb people in other rooms. The settings are “Max” No compression, “Normal” 11dB of
compression and “Night” 22 dB of compression.
NOTE:
The OSD will display a DYN label next
to the volume setting when Dynamic Range compression is in use.
5.1 Input Setup –
Adjusts the number of active channels used in the discrete 5.1 analog input. This
reduces the amount of noise being introduced into the Evolution 707 insuring the best possible
performance. The 5.1 Input setup options are:
Active Inputs – (L R),( L C R), (L R SL SR), and (L C R SL SR)
Active SW – Yes or No.
Program Remote -
A function designed to help set up a learning universal remote. It is of particular
use in adding a function that is not on the Evolution 707’s remote control. Follow the instructions
below to begin and end the program remote function.
To begin, turn the volume control to select a command. The command appears on the front
panel display window.
Place the programmable remote in program mode (see the learning remote user manual).
Place the infrared sensor of the programmable remote so that it faces the infrared emitter
on the Evolution 707 front panel.
Press and hold the save button on the Evolution 707 front panel until the programmable
remote has learned the code (see the learning remote user manual for information on the
actions required to learn code).
Select and save as many commands as required.
Press the recall button on the front panel to return to the Program Remote Screen and exit
from the Program remote mode.
System Information –
Displays system information about the Evolution 707. The following
information is displayed:
AC Line frequency – Displays which line voltage frequency is confi gured.
Software version – Displays the currently Installed fi rmware version
EE Prom version – Displays the currently installed hardware control software.
E.
4.
A.
B.
5.
A.
B.
C.
D.
E.
F.
6.
A.
B.
C.
