4.
Select DELAY. You are prompted to enter a delay time of 0-30
seconds.
5.
Enter the delay time.
6.
Press enter to confirm the selection. The display reads: DELAY.
7.
Use the level control knob or volume up and down keys to scroll
to: BACK.
ON
The 12 Volt trigger output is enabled at power on for the selected trigger
(Trigger 1 or 2).
OFF
The 12 Volt trigger output is disabled at power on for the selected trig-
ger (Trigger 1 or 2).
DELAY
The 12 volt trigger output is enabled at power on after a delay of 0-30
seconds.
AC Mains
This function enables you to operate the S-300i from a switched
AC outlet. If AC Mains is set to On, the preamplifier turns on after
a brief delay, by-passing stand-by. Thereafter, you may switch the
preamplifier to and from stand-by, using the power button or
power key (1). The options are: OFF, ON
Enter the menu, then:
1.
Turn the level control knob on the preamplifier front panel or
up and down keys (10) on the remote control to select: AC
MAINS.
2.
Press the level control knob on the preamplifier front panel or
the enter key (8) on the remote control. The front panel display
(9) shows the default mode: OFF
3.
Use the level control knob or the up and down keys to
select the desired option: OFF or ON.
4.
Press the enter button or key to confirm the selection. The
front panel display reads: AC MAINS.
OFF
The S-300i remains in stand-by mode when AC power is applied.
Input Name Options
AUX, AUX1, AUX2, AUX3
B L U R AY, BYP, CABLE, CD, CD1, CD2, CD-
R, COMP
DAC, DAT, DCC, DISC, DISC 1, DISC 2,
DISC 3, DSS, DVD, DVD1, DVD2, DVD3,
DVD-A, DVR,EQ, GAME, HI-8, HD, HD-DVD,
IPOD, LD, LD1, LD2, LINE 1, LINE 2, LINE 3,
LINE, MDISC, MIXER, MON, MP3
PHONO, PHONO1, PHONO2, PROC
SACD, SAT, SAT1, SAT2, SRC1, SRC2,
SRC3, SURR,
S - V I D
TAPE1, TAPE2, TAPE3, TAPE, TEST, TUNER,
TUNER1, TUNER2, TV,
VCR, VCR1, VCR2, VCR3, VDISC, VIDEO,
VIDEO1, VIDEO2, VIDEO3, 8MM, 8TRK
Krell S-300i
2 3
Optional Configurations,
c o n t i n u e d
