ANALOG AUDIO
OUTPUTS
22 L and R Balanced
Analog Audio Outputs
One pair of balanced out-
puts with XLR connec-
tors.
23 Multi-channel Single-
ended Analog Audio
Outputs
For connection to a multi-
channel receiver, with
RCA connectors:
L, R
= left and right chan-
nel connections.
C
= center channel
connection.
SW
= subwoofer connec-
tion.
SL, SR
= left and right
surround channel
connections.
DIGITAL AUDIO
OUTPUTS
24 Optics Output
One EIAJ fiber optical
digital output with a
TosLink connector.
25 Coax Output
One S/PDIF coaxial digi-
tal output with an RCA
connector.
BACK PANEL REMOTE
CONNECTIONS
26 12 VDC In/Out
(12 V Trigger)
Out.
The output sends 12
VDC power on/off signals
to other Krell components
and other devices that
incorporate a 12 V trigger.
In.
The input receives
12 VDC power on/off sig-
nals from other compo-
nents and devices that
incorporate a 12 V trigger.
27 IR Select
Front
= IR select switch
in the up position indi-
cates that the front IR is
active.
Rear
=IR select switch
in the down position indi-
cates that the back panel
IR is active.
28 IR
Remote infrared sensor.
9 RS-232
The RS-232 communica-
tion port allows you to
send operational instruc-
tions to the SACD
Standard using an exter-
nal computer control
system.
POWER
30 Back Panel Power
Switch
Use this switch to change
the SACD Standard from
off to stand-by.
31 IEC Connecto
r
Use the provided IEC
standard 15 amp power
cord.
10
Krell SACD Standard
Features
Figure 3 The SACD Standard Back Panel
MADE IN USA
NO USER SERVICEABLE PARTS INSIDE
RS-232
50/60 Hz
IR
FRONT
SELECT
IR
OUT
REAR
POWER
OPTICS
COAX
IN
DIGITAL AUDIO OUT
SL
C
L
SR
SW
R
L
ANALOG AUDIO OUTPUTS
12VDC
R
SACD Standard
22
23
25
24
27
26
28
29
30
31
