Remote Control Description,
continued
24
Krell Showcase Processor
Note
65 Stereo Key
Use this key to select stereo decoding, which allows you to make an
A/B comparison or listen to a stereo recording in two channel format
(left and right). The red LED illuminates when this feature is engaged.
After you select a mode, press the stereo button once. Press the
stereo button again to make the A/B comparison. Press the stereo
button again to exit stereo format.
You can make an A/B comparison when you press the stereo button, only if
you have selected a previous mode.
66 M1 Key (Mode 1 Key)
67 M2 Key (Mode 2 Key)
Use these keys to select available processing modes (such as Dolby
Digital, DTS, PLII Movie, THX, etc.) for incoming signals from a video
or audio source.
The default mode for a signal is always stored in Mode 1. Use the
Mode 1 key to select the default mode. All other modes that can be
used for the same signal are automatically stored in Mode 2. Use the
Mode 2 key to scroll through these other modes. The last mode dis-
played in Mode 2 is the one selected. Based on the source signal,
the Showcase Processor automatically selects the correct modes
available for the signal.
68 Pro Logic II Key
Use this button to select the available Dolby Pro Logic II modes for
Dolby Surround encoded material, including laser discs, videotapes,
television broadcasts, and compact discs. The red LED illuminates
when the Showcase Processor is in the Dolby Pro Logic II decoding
mode.
This mode is selected automatically if Dolby Digital source material is
encoded for Pro Logic. To turn off this mode, press the Pro Logic II key.
Processing Mode Keys
Note
