Remote Control Description,
continued
Krell Showcase Processor
25
69 Pre Key (Preamp Pre Key)
Use this button to send the signal from the analog input directly to
the volume control, with no digital processing, using the analog stage
of the preamp. This avoids possible digital signal degradation and
can be used for components such as the Krell KPS 28c Compact
Disc Player that have a high quality signal. See
Assign Analog
Audio Inputs,
on page 43, for information on assigning the analog
input to one of the device buttons (DVD, LD, SAT, VCR, TV).
This feature is only available with a signal from an analog input. If you
attempt to use it with a signal from a digital input, the Showcase Processor
on-screen display will read
NOT ALLOWED.
70 Bal Key (Balance Key)
Press and hold this key to convert the volume level controls to bal-
ance controls. See
Balance Button (26),
on page 16.
Use the center, surr/back, and sub keys to change taste trims (to make
temporary loudspeaker output adjustments) of +/- 10 dB. These temporary
changes revert to 0 dB when a new device is selected or the system is
powered down. For more information on taste trims and master (program-
mable) trims, see
Configure Level Adjustment,
on page 47.
71 Cntr Key
Use this key to select the center loudspeaker, then use the direction
keys (75) to adjust volume.
72 Surr/Back Key
Use this key to select the surround and/or back loudspeakers, then
use the direction keys (75) to adjust the volume of the surround loud-
speakers. To adjust the back loudspeakers, press the surr/back but-
ton.
SURROUND TRIM
appears on the front panel display (23). Press the
surr/back button again.
SURR/BACK
appears on the front panel display.
Then use the direction keys (75) to adjust the volume of the back
loudspeakers.
73 Sub Key
Use this key to select the subwoofer, then use the direction keys (75)
to adjust volume.
Control Function Keys
Note
Note
Processing Mode Keys,
continued
