36
Krell Showcase Processor
The third option on the main menu screen,
CALIBRATE VOLUME,
allows
you to calibrate each channel using the internal noise generator of
the Showcase Processor.
A sound pressure level (SPL) meter is required for this procedure.
Select
CALIBRATE VOLUME
on the
MAIN MENU.
The
CALIBRATE ROOM SETUP
screen appears:
Press the enter key to choose
AUTO NOISE SEQUENCE.
The
AUTO
CALIBRATION
screen appears:
System Configuration,
continued
Calibrate Room Setup Screen
Auto Noise Sequence
Auto Calibration Screen
Note
SHOWCASE
-CALIBRATE ROOM SETUP-
SELECT THE CALIBRATION
METHOD
AUTO NOISE SEQUENCE
MANUAL NOISE SEQUENCE
PROGRAM MATERIAL
SHOWCASE
-AUTO CALIBRATION-
LEFT
0
DB
L SURR
0
FT
L BACK
0
FT
CENTER
0
DB
SUB
0
DB
C BACK
N/A
RIGHT
0
DB
R SURR
0
DB
R BACK
0
FT
STEP 3
CALIBRATE VOLUME
How To Navigate the Menu
and Make a Selection
1. Use the direction keys to scroll
from line to line.
2. Press enter to select a line.
3. Use the direction keys to scroll
through options within a line.
4. Press enter to select and set
an option.
5. Use the direction keys to scroll
to the next line.
