62
Krell Showcase Processor
System Configuration,
continued
Program Remote,
continued
1. Press the front panel level buttons (28) to select a command. The
command appears on the front panel display window (22).
2. Place the programmable remote in program mode (see the learn-
ing remote user manual).
3. Place the infrared sensor of the programmable remote so that it
faces the infrared emitter (15) on the Showcase Processor front
panel.
4. Press and hold the save button (27) on the Showcase Processor
front panel until the programmable remote has learned the code
(see the learning remote user manual for information on the time
needed to learn the code).
5. Select and save as many commands as desired.
6. Press the recall button (29) on the front panel to exit the program
mode.
System Information Screen
System Information
SHOWCASE
-SYSTEM INFORMATION-
AC LINE FREQUENCY:
SOFTWARE VERSION:
EEPROM VERSION:
EEPROM TYPE:
60 HZ
0.6
2
2
The
SYSTEM INFORMATION
menu displays AC line frequency, the version
of software that your component is currently using, and information
about the
EEPROM
.
Select
SYSTEM INFORMATION
from the
OPERATION
menu. The
SYSTEM
INFORMATION
screens appear:
Press the previous button (74) to return to the
OPERATION
menu.
How To Navigate the Menu
and Make a Selection
1. Use the direction keys to scroll
from line to line.
2. Press enter to select a line.
3. Use the direction keys to scroll
through options within a line.
4. Press enter to select and set
an option.
5. Use the direction keys to scroll
to the next line.
Note
