Rev. Date: 3/8/17
Page 2
MODEL #4000-G-A
RECEIVING YOUR MODEL #4000-G-A KRENDL MACHINE:
Immediately check the condition of your Model #4000-G-A machine when it is received
. It
should be received in the same condition that it was shipped to you.
If there are any visible prob-
lems with your machine or any other items in the shipment, it is imperative that you place any
claim with the delivery carrier.
Please save all packaging materials for inspection. The delivery
carrier should also contact our office before leaving the premises to notify us of a claim. The ownership
to your machine and all other items in the shipment were transferred to your name as soon as the
shipment left our premises, thus it is your responsibility to contact us with any claims. Contact the
truck line to arrange for an independent inspector to come out to inspect the damage and to prepare
the inspection report. It is imperative that this inspection is done prior to unpacking or using any of the
equipment. Please contact us for assistance or with any questions you may have regarding the claim
process.
UNPACKING:
Handle all cartons with care to avoid damage from dropping or bumping. Completely remove
machine from the packaging and from any shipping pallet or skid to which it might be attached. In
addition, completely remove all shipping materials from inside the machine. Check that all parts are
included as stated on the below.
ACCESSORIES INCLUDED:
• 150’ REMOTE CONTROL CORD
• MULTIMETER
• SPANNER WRENCH FOR BELT TENSIONERS
• #60 CHAIN MASTER LINK
• SECTION OF CHAIN FOR CHANGING SHREDDER DIRECTION
• EXHAUST SYSTEM
• 5/16 ALLEN WRENCH FOR ADJUSTMENT OF CHAIN IDLERS
• OWNERS MANUAL
• ENGINE COOLING AIR INTAKE HOSE AND CLAMPS
• FUEL TANK WITH LINES
• 1/2” BOLTS, WASHERS, LOCKNUTS FOR FASTENING MACHINE
UNPACKING AND INSPECTING EQUIPMENT
GENERAL SAFETY INFORMATION
Important
: Read
all
instructions
before
operating this equipment. This equipment can be poten-
tially dangerous and must be used in strict accordance with instructions.
Disclaimer Notice
: The manufacturer will not be legally responsible for any injury or damage
resulting from the improper use of this equipment or the failure to follow instructions.
Unpacking
Handle cartons with care to avoid damage from dropping or bumping. Completely remove the
machine from the packaging and from any shipping pallet or skid to which it may be attached. In
addition, completely remove all shipping materials from the
inside
of the machine.
Important:
Please recheck inside the hopper for any loose items or damaged equipment.
Injury may occur when equipment is started with foreign material in the hopper.
