17
EN
replacing the blades, make sure to replace ALL of them at the same time. You can replace them with one of
the spare blade kits and extra blade screws supplied with your MissionNANO™.
Before attempting to replace your MissionNANO™’s blades, turn the power off and put on protective gloves
and follow these steps:
1. Gently flip the MissionNANO™ over.
2. Remove the battery cover and remove the battery.
3. Take the screws off the blades with a screwdriver.
(See Fig. M)
4. Firmly screw on the new blades.
5. Refit the battery and the battery cover.
Important: After screwing the blade to the blade
disc, make sure the blade is able to spin freely.
9.2 Keep it Clean
WARNING:
Before cleaning, turn your
MissionNANO™ OFF. Put on protective gloves
before cleaning the blade turning disc and do not rinse or
flush with water.
A. Cleaning the Body
Your MissionNANO™ will live a much happier and
longer life if it is cleaned regularly. Although, since your
MissionNANO™ is an electric machine, you will need
to take care when cleaning. DO NOT use a hose, high
pressure washers or otherwise pour running water on
your MissionNANO™. It is best to use a spray bottle filled
with water. When cleaning the machine body, use a soft
brush or clean cloth and avoid using solvents or polishes
(See Fig. N). Lastly, remove all build up of grass clippings
and debris.
B. Cleaning the Underside
Again, it is important that you power the MissionNANO™ OFF and
wear protective gloves before touching
the blade turning disc.
First, flip your MissionNANO™ upside down to expose its underside. Here you will see the blade disc, the
chassis, and the front wheel and driving wheels. Clean everything thoroughly with a soft brush or moist rag.
WARNING: NEVER clean the underside of MissionNANO™ with running water.
Component
damage can occur. (See Fig. O1, O2)
Rotate the blade disc to ensure it rotates freely. Check the blades spin freely around the fixing screws. Remove
any obstructions.
IMPORTANT: Remove any lodged debris so that it does not cause a crack in the blade disc. Even
the tiniest crack can decrease your MissionNANO™ 's mowing output.
O1
O2
