20
EN
11. Error messages
Symptom
Cause
Action
Red
light on
MissionNANO
TM
is
trapped.
1. Turn MissionNANO
TM
off;
2. Take MissionNANO
TM
to an area in your lawn free of obstacles
obstacles;
3. Turn MissionNANO
TM
on. Wait until the battery indication light stays
green. (If MissionNANO
TM
has low battery capacity, the battery indication
light will stay red.) Press
.
4. If the error message is still displayed; turn power off; turn
MissionNANO
TM
upside-down. Check if there is anything preventing the
wheels from rotating.
5. Remove any obstruction, turn the MissionNANO
TM
upright, turn power
on.
Red
light flashing
twice per
cycle
MissionNANO
TM
is outside working
area.
1. If MissionNANO™ is actually outside its territory: turn MissionNANO™
off, take MissionNANO™ inside its territory. Turn MissionNANO™ on. Wait
until the battery indication light stays green. (If MissionNANO™ has low
battery capacity, the battery indication light will stay red.) Press
.
2. If the MissionNANO™ is inside its territory, check if the LED on the
Charging Base is green. If not, verify that the Charging Base is properly
connected to the charger and that the charger is connected to a suitable
power supply. If they are properly connected, the boundary wires are
clamped incorrectly and must be reversed.
3. If the LED light flashes green, confirm that the boundary wire is well
connected to the clamps on the Charging Base. If the problem persists,
check that the boundary wire hasn’t been cut.
Blue
light on
Wheel motor
blocked
1. Turn MissionNANO™ off; take MissionNANO™ to an area free of
obstacles;
2. Turn MissionNANO™ on. Wait until the battery indication light stays
green. (If MissionNANO™ has low battery capacity, the battery indication
light will stay red.) Press
.
3. If the error message is still displayed; turn power off; turn
MissionNANO™ upside-down and check if there’s anything preventing
the wheels from rotating.
4. Remove any obstruction, turn MissionNANO™ upright, turn power on.
Blade disc
blocked
1. Turn MissionNANO™ off;
2. Turn MissionNANO™ upside down and check if there’s anything
preventing the blade disc to rotate.
3. Remove any obstruction.
4. Turn MissionNANO™ upright and take it to an area with short grass or
adjust the cutting height;
5. Turn MissionNANO™ on. Wait until the battery indication light stays
green. (If MissionNANO™ has low battery capacity, the battery indication
light will stay red.) Press
.
Blue
light flashing
twice per
cycle
MissionNANO™
is lifted up.
1. Turn MissionNANO™ off.
2. Take MissionNANO™ to a lawn area clear of obstacles, turn
MissionNANO™ on. Wait until the battery indication light stays green. (If
MissionNANO™ has low battery capacity, the battery indication light will
stay red.) Press .
3. If the error message is still displayed: turn MissionNANO™ off, turn
MissionNANO™ upside-down and check there’s nothing lifted up.
4. Remove any possible object, turn MissionNANO™ upright, turn
MissionNANO™ on.
