9
EN
Intended Use
The garden product is intended for domestic lawn mowing. It is designed to mow often, maintaining a healthier
and better looking lawn than ever before. Depending on the size of your lawn, MissionNANO
TM
may be
programmed to operate at any time or frequency. It is not intended for digging, sweeping or snow cleaning.
4. Control panel
Start
1) After the boundary wire installation, you can start using the MissionNANO
TM
(Please refer to Installation
Guide for boundary wire installation).
2) Turn the main switch to “I”(on). Wait until the battery indication light stays green. (If MissionNANO
TM
has low
battery capacity, the battery indication light will stay red.) If the battery is too low, it will not stay red but shut-
down to prevent battery damage (please refer to Battery Life for emergency charge).
3) Press
, then press
to start mowing.
4) Press
then
to make MissionNANO
TM
go to the charging base.
MissionNANO
TM
will work continuously until reaching low battery power level and then it will return to the
charging base. Once charging is complete, MissionNANO
TM
will automatically resume mowing or it stay in the
charging base according to mowing schedule.
Battery indication light
Displays battery/machine
status
Error indication light
Displays error messages
HOME
Sends MissionNANO
TM
to
its charging base during
operation and activates
charging
OK
Confirms any setting/
Enters Wi-Fi connection
mode
STOP
Stops MissionNANO
TM
during operation
START
Starts mowing/Corrects
the problem
