AS 72 S
English
9
1
Keyless chuck
2
Bit garage
3
Rotational direction switch
4
ON/OFF switch
5
Battery locking
6
Battery
7
Battery charging unit
Accessories illustrated or described are not always
included as standard delivery items.
Measured values determined according to
EN 50 260.
Sound pressure level:
52 + 3 dB (A)
Sound power level:
65 + 3 dB (A)
Work place emission value:
55 + 3 dB (A).
For operation, noise protection measures are
required.
The acceleration measured is usually less
than 2.5 m/s
2
.
The machine is noise-suppressed according to
EN 55 014.
The rated voltage of the battery must agree with the
value on the machine.
– The batteries are not charged. They therefore have
to be charged before use.
– A new battery develops full power only after it has
been subjected to approx. 5 charging and dis-
charging cycles.
– The maximum service life of the batteries is
attained if you charge these at an ambient temper-
ature of b5 °C and max. +45 °C.
– If the battery is not within the permitted loading
temperature range (approx. +5 °C and +45 °C)
charging time is extended by the cooling or warm-
up time.
– Important! Batteries will discharge even if the tool is
not used. They should therefore be re-charged reg-
ularly.
– Do not leave the battery in the charger if the latter
is not in operating condition.
To ensure long service life, the batteries should
always be charged in good time. This is particularly
important if you notice a reduction in power ouput.
1. Remove battery
6
from the handle by simultane-
ously pressing the locking device
5
.
2. Make sure that the mains voltage complies with
the voltage on the name-plate on the charger.
Connect charger plug to mains.
3. Push battery into battery until it snaps into place.
3 Illustration
4 Technical Data
Electronic battery-driven
rotary screwdriver
AS 72 S
Article number
12 04 0519
Right/Left rotation
•
No-load speed
330 rpm
Screwing into wood up to max. 6 mm
Screwing into metal up to max. 5.3 mm
Drilling into steel up to
8 mm
Drilling into light metal up to
10 mm
Drilling into wood up to
10 mm
Spindle thread
1/2" x 20 UNF
Drill chuck span
1–10 mm
Max. torque
14 Nm
Weight with battery
approx. 1.1 kg
Rechargeable Battery A6
Article number
(Spare parts no. 26292)
98 01 6201
Type
NiCd
Rated voltage
7.2 V
Capacity
1.5 Ah
Number of cells
6
Operating temperature range
+5 °C ... +45 °C
Weight
0.4 kg
Battery charging unit
A 30950 G
Spare parts no.
28090
nput voltage
230 V ~
Output voltage
9 V
Charging current/time
approx. 0.4 A/
approx. 3 h
Weight
approx. 0.4 kg
5 Noise/vibration information
6 Charging the batteries
Summary of Contents for 12 04 0519
Page 2: ...7 6 ...
Page 3: ...6 1 2 3 4 5 ...
