7
Lithium-Ion LED Worklight
KUF05.9
COMPONENT LIST
1.
HANDLE SLEEVE
2.
HANDLE
3.
ADJUSTING KNOB
4.
HOOK
5.
BRACKET SEAT
6.
RUBBER PAD
7.
BRACKET
8.
FRONT COVER
9.
ON / OFF SWITCH
Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
KUF05.9
Rated Voltage
20V
Max*
Lumen
I: 750LM; II: 1500LM
Machine weight
2.0kg
*Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
OPERATING
INSTRUCTIONS
NOTE:
Before using the tool, read the instruction
book carefully.
Action
Figure
OPERATION
Starting & Stopping
To start your light just depress on/off
switch marked “I”.
To stop your light just depress the on/off
switch marked “O”.
Warning!
Do not direct the light beam into
your eyes.
See Fig. A
Placing the light
Warning!
Ensure the work light is
securely placed to prevent falling
object hazard.
Using the hook to hang the light
Warning!
Do not hang the work
light on any electrical power cord!
See Fig. B
Using the bracket to set the light
Add:
You may use a screw to secure
the work light in place.
See Fig. C
Using the bracket to hang the light
See Fig. D
Adjustable head
The work light head can be set in a
variety of positions. To switch base
positions, rotate the adjusting knob to
loosen the light. Adjust head to desired
position , tighten the adjusting knob .
Caution!
Do not place hands or fingers between
adjustable head and bracket when
positioning work light to avoid any
hazard!
See Fig. E
MAINTENANCE
Your tool requires no additional lubrication or
maintenance. There are no user serviceable parts in your
tool. Never use water or chemical cleaners to clean your
tool. Wipe clean with a dry cloth. Always store your tool
in a dry place.
ENVIRONMENTAL
PROTECTION
Disposal
The machine, its accessories and
packaging materials should be sorted
for environmentally friendly recycling.
The plastic components are labeled for categorized
recycling.
Positec Australia Pty Limited
10 Corporate Blvd Bayswater, VIC 3153, Australia
