7
Rotary hammer
KUX12P
For impacting only - for
light chipping, chiseling and
demolition applications choose
the Hammer position.
For adjustment of the chiseling
position choose the bit angle
position
WARNING:
The operating mode selector switch
may be actuated only at a standstill.
WARNING:
Prolonged use will cause the
aluminum housing to become hot, do not touch.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or
maintenance. There are no user serviceable parts in
your power tool. Never use water or chemical cleaners
to clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place. Keep the
motor ventilation slots clean. Keep all working controls
free of dust.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Add approximately 10 grams of 1# lubricant (about 2-3
water bottle caps) to the gearbox every 100 operating
hours
.
Positec Australia Pty Limited
10 Corporate Blvd Bayswater, VIC 3153, Australia
