KSX Pro / KS Evo -
ENGLISH
10
1.1 These electropumps have been designed to
recirculate lightly treated water in swimming
pools and spas, both private and public.
1.2 TECHNICAL CHARACTERISTICS.
Motor:
Power rating: See nameplate ratings on
electropump.
Insulation:
Class E.
Operation:
Continuous.
Protection:
IP 55.
Current:
Monophase and triphase
(see nameplate ratings).
Consumption: See nameplate ratings.
Frecuency:
See nameplate ratings.
R.P.M.:
See nameplate ratings.
Shaft:
Stainless steel.
Bearing:
Armoured ball bearing.
Atmospheric
temperature: Maximum 40ºC.
Pump:
Water temperature: Maximum 50ºC.
Maximum pressure: 2 bar.
Impeller model:
Closed.
Type of seal:
Mechanical retainer.
Impeller & diffuser casing: Synthetic material (PPO).
Pump casing:
Synthetic material
(PP +30% GF).
Filter cover:
Synthetic material (SAM).
Basket:
Synthetic material(PP)
Aspiration diameter: 50 / 63 mm
Impelling diameter: 50 / 63 mm
2.0 INTRODUCTION
This Handbook contains the necessary
instructions for installation, use and maintenance
of the swimming pool electropump. In
order to obtain the maximum yield shown
by the manufacturer in the Description of
Characteristics, it is necessary to fulfil and follow
correctly all the recommendations given in this
Handbook.
This will allow operation with a safe and long-
lasting piece of equipment.
The equipment supplier will furnish the user
with complementary information, if required.
2.1 SAFETY SIGNS USED IN THE
HANDBOOK.
All instructions referring to possible risks
to persons are highlighted by the following
symbols:
Other instructions in relation to the functioning
of the equipment with which non-compliance
could cause physical damages are highlighted
with the warning:
1. DESCRIPTION
2. GENERAL
ATTENTION
Danger in
general
Danger of
electrocution
Standard DIN
4844-W8
Standard DIN
4844-W9
