34
MENU 9
9
.
—
Zmiana kierunku obrotów napędu (góra/dół)
9
.
-
Zmiana kierunku
obrotów napędu
9.-
Wciśnij i przytrzymaj przycisk SET przez ok 6
sekund, aż na wyświetlaczu pojawi się 0.- na-
stępnie puść przycisk:
- używaj prz, aby wybrać 9. - ;
- następnie krótko przyciśnij przycisk SET, aby
wybrać tą funkcję, a na wy świetlaczu pojawi się:
9.1
9.1
kierunek obrotów do góry (domyślnie)
9.0 9.0
kierunek obrotów do dołu
Uwaga Po zmianie kierunku obrotów koniecznym jest
ponowne nauczenie położeń krańcowych
USTAWIENIA PARAMETRÓW FUNKCJI W MENU
Kod
błędu
Opis błędu
Sposób naprawy
E 0.
Uszkodzenie enkodera,
Enkoder nie odczytuje
pozycji bramy.
1. Sprawdź podłączenie enkodera.
2. Wymień enkoder.
E 1.
Brak reakcji napędu
na polecenia centrali.
1. Sprawdź połączenie między silnikiem
a centralą sterującą.
E 2.
Zła biegunowość silnika.
1. Zamień miejscami przewody zasilające silnik.
E 3.
Zbyt wysoki prąd silnika.
1. Sprawdź ustawienia siły w centrali sterującej.
2. Sprawdź działanie i wyważenie samej bramy.
3. Wymień napęd na mocniejszy.
KODY BŁĘDÓW