48
The quick release mechanism with a cord
enables manual operation of the door by
disconnecting the gear in the drive in the
event of a failure or power failure.
1. Install the (supplied) cord of appropriate
length to the ring on the drive.
2. In order to unlock the drive (disengage
the gear), pull the cord downwards. Now
the shaft of the door can rotate freely in
the drive, and you can open and close the
door manually.
3. The cord handle should be 1.8 m above
the floor in order to prevent accidental
operation and operation by children.
QUICK EMERGENCY RELEASE WITH CORD
COMPLETION OF INSTALLATION / MAINTENANCE
Installation
- check if all fasteners (console, mounting screws, retaining rings) are properly
tightened and in good technical condition.
Electric wiring
- check connection cables for mechanical damage or crushing.
- check for the correctness of electrical connections and contacts.
Emergency manual operation
- check the operation with power supply off.
Limit positions and elements of additional safety protection
- check the limit positions by completely opening and closing the door.
- check the operation of safety devices installed in the door.