66
6
.
4
Beacon settings
6.4
Press and hold the SET button for about 6 se-
conds until the display shows O.; then release the
button
- use the + button to select 6.; then shortly press
the SET button to select this function
- press the SET button again and the display will
show 6.0 (default)
- use the + button to select 6.4; then shortly press
the SET button to select this function and display
the parameters:
. 1
The beacon flashes when the door is moving.
. 2
The beacon is on when the door is moving.
. 3
The beacon flashes when the door is moving
or stopped
. 4
The beacon is on when the door is moving or
has been stopped.
. 5
The beacon flashes when the door is moving and
lights up when it has been stopped.
. 6
The beacon is on when the door is moving and
flashes when it is stopped.
Note
. 1
By default
SETTINGS OF FUNCTION PARAMETERS IN MENU