SERVICE
8
43
BW25
www.krohne.com
10/2008 • 4000432301 MA BW25 R01 en
Service
8.1 Maintenance
During routine operational maintenance of the system, the level meter should also be checked
for soiling, corrosion and mechanical wear or damage to the displacer rod, pressure sleeve and
the display.
We advise that inspections be carried out at least once per year. The device must be removed
before cleaning.
8.2 Spare parts availability
The manufacturer adheres to the basic principle that operational spare parts for each device or
each important accessory part will be kept available for a period of 10 (ten) years after delivery of
the last production run for that device.
Operational spare parts are defined as parts that are subject to faults in normal operation.
8.3 Availability of services
The manufacturer offers a range of services to support the customer after expiration of the
warranty. These include repair, technical support and training.
CAUTION!
Before dismantling, ensure that the tank is depressurised and vented.
In the case of devices used for measuring aggressive media, appropriate safety precautions
must be taken with regard to residual liquids on the measuring section.
Avoid electrostatic charges when cleaning the surfaces (e.g. viewing window)!
NOTE!
For more precise information, please contact your local representative.
MA_BW25_R01_en_PRT.book Page 43 Thursday, October 30, 2008 3:49 PM
