MagCheck
25
4.7.1 Information
"Flowmeter has been changed..."
This information will appear if, compared to the first verification, one of the following parameters has
been changed: GK, nominal diameter , Full scale, I0%, I100%, settings of pulse output.
4.7.2 Printing the Trend Analysis
Open the specific flowmeter file.
On Main Menu Bar select "File", "Print", "Page
setup". Adjust page settings.
Select: "File", "Print", "Trend analysis”.
4.7.3 Trend Analysis Print selection menu
This menu allows for selection of:
•
the
device
•
the parameter sequence to be printed
•
print preview on the monitor,
•
printing as Adobe Acrobat-Reader .PDF-file,
which may be stored or sent by e-mail
•
or print on any printer connected to the PC.
4.7.4 Printing
verification certificates
On Main Menu Bar select: "File", "Print", "Page
setup". Adjust page settings.
Select : "File", "Print", "Certificate".
This menu allows for selection of the device, the parameter set (verification) to be printed, print
preview on the monitor, printing as Adobe Acrobat-Reader *.PDF-file, which may be stored, sent by
e-mail or printed on any printer connected to the PC.
