5
OPERATION
24
OPTIBRIDGE
www.krohne.com
07/2016 - 4004307801 - MA OPTIBRIDGE R01 en
5.3 Online configuration
5.3.1 Device list
The window can be accessed via menu "additional functions"
The device DTM offers in addition to the function "Topology scan" an own window "Device List" to
scan the HART
®
bus for devices. Press the button "Update List"
1
to scan for devices. Press the
button "Stop Scan"
2
to stop the scan. The device list provides information about HART
®
devices
that are connected to the HART
®
networks. If the device list is opened offline, it provides a list of
Child DTMs without associated devices.
INFORMATION!
To use the following functions the device DTM has to be connected via pressing the "connect"
button in PACTware
TM
.
Figure 5-5: Device list
Address
The Polling address of the device.
State
State field is used to display an icon, that reflects the state of device configuration.
The following icons are possible.
This entry represents a Child DTM. This DTM is not associated to any existing
HART
®
device.
This entry represents an existing HART
®
device. No Child DTM is configured
for this device.
This entry represents a HART
®
device which is configured with a Child DTM.
Channel
This is the used channel of the device Comm DTM.
In Use
Status about whether the device DTM is connected.
HART TAG
TAG of the device stored in the device itself.
DTM TAG
TAG of the device DTM.
Manufacturer
Manufacturer of the device.
Dev Type
Device type of the HART
®
device.
Dev ID
Device ID of the HART
®
device.
HW Rev
Hardware revision of the device.
SW Rev
Software revision of the device.