33
R
Re
eff
D
Diis
sp
plla
ayy
D
De
es
sc
crriip
pttiio
on
n &
& S
Se
ettttiin
ng
gs
s
C
C6
6 D
De
evviic
ce
e c
cttd
d......
C6.6
Special Functions
C6.6.1
Reset Errors
This menu function can be used to reset all errors, that are not
removed automatically (e.g. power fail)
step 1:
Reset?
no: exit the function
yes: resets the errors and exits the function.
C6.6.2
Save Settings
In this menu all settings can be saved in different storage places)
Step 1
Save Settings?
break
Exit the menu without saving
backup 1
Saves the settings in the backup 1 stor-
age place
backup 2
Saves the settings in the backup 2 stor-
age place
Step 2
Go on with copy? (Note: There is no possibility to
undo this command!)
N
No
o
Exit function without saving
Y
Ye
es
s
Copy the actual settings to the selected stor-
age place and exits the function.
Note: PROFIBUS interface settings will not be saved
C6.6.3
Load Settings
(in this menu all settings can be loaded from different storage places,
where settings have been saved before)
step 1
Load Settings?
break
Exits the menu without loading
factory settings
Loads the settings from the deliv-
ery
backup 1
Loads the settings from the back-
up 1 storage place)
backup 2
Loads the settings from the back-
up 2 storage place)
step 2
go on with copy? (Note: There is no possibility to
undo this command!)
N
No
o
exit function without saving
Y
Ye
es
s
copy the actual settings to the selected stor-
age place and exits the function
Note: PROFIBUS interface settings will not be loaded
C6.8
Physical Block
This menu is only available, if a PROFIBUS interface is present
C6.8.1
Station Address
Selects the PROFIBUS station address of the device
N
No
otte
e::
The PROFIBUS address can also be changed using the PROFIBUS
service “set_slave_add”. The input range is 0...125 according to the
PROFIBUS specification. Address 126 is the default address and can-
not be set via the PROFIBUS service “set_slave_add” - use menu
instead to reset to default address.
