12/2021 - 4009151901 - OPTISONIC 6300 P R01 en
5
6
Charge the battery of the signal converter before first use and download and install the mobile application that is
necessary to configure your measuring application.
After downloading the application, make sure to adjust and set the following parameters on your mobile device:
● go to "Settings" / Wireless and networking / Tethering
● switch on Bluetooth Tethering
● set mobile connections to “Bluetooth”
Press the "On/Off button of the UFC 300 P converter for approximately 3 seconds to initialise the converter and
establish connection with your device.
3 Quick Setup
Charging indication and battery status
Indication of data exchange and connection
On/Off button and status LED
● choose "Go to dashboard"
to select logging features or a
previous saved log-file
● For more information and options go to
"Dashboard"
● select "Measurements"
to set or display measurement
Download and install the mobile application on your device.
In case Bluetooth operation is not used, you can choose for the wired USB connection.
Connect the I/O cable with USB to the Android mobile or tablet to maintain communication.
each
choose "Installation wizard"
and follow up with the spe
screen
