28
9 Supplement
OPTISWITCH 3200 C • NAMUR
31357-EN-210702
Ʋ Tragkabel FEP (-40 … +150 °C/-
40 … +302 °F)
0.6 … 80 m (1.969 … 262.47 ft)
Torque for NPT cable glands and Conduit tubes
Ʋ Plastic housing
max. 10 Nm (7.376 lbf ft)
Ʋ Aluminium/Stainless steel housing
max. 50 Nm (36.88 lbf ft)
Output variable
Output
Two-wire NAMUR output
Current consumption
Ʋ Falling characteristics (max.)
≥ 2.2 mA uncovered/≤ 1.0 mA covered
Ʋ Rising characteristics (min.)
≤ 1.0 mA uncovered/≥ 2.2 mA covered
Ʋ Fault message
≤ 1,0 mA
Necessary processing system
NAMUR processing system according to IEC 60947-5-6
(EN 50227/DIN 19234)
Modes (NAMUR output adjustable to falling or rising characteristics)
Ʋ Min.
rising characteristic curve (High current when immersed)
Ʋ Max.
falling characteristics (Low current when immersed)
Ambient conditions
Ambient temperature on the housing
-40 … +80 °C (-40 … +176 °F)
Storage and transport temperature
-40 … +80 °C (-40 … +176 °F)
Process conditions
Measured variable
Limit level of solids
Process pressure
-1 … 6 bar/-100 … 600 kPa (-14.5 … 87 psig)
Process temperature OPTISWITCH 3200
C of 316L
-20 … +80 °C (-4 … +176 °F)
Product density
Ʋ Standard sensitivity
> 0.02 g/cm³ (0.0007 lbs/in³)
Ʋ High sensitivity
> 0.008 g/cm³ (0.0003 lbs/in³)
Granular size
max. 10 mm (0.4 in)
Electromechanical data
Options of the cable entry
Ʋ Cable entry
M20 x 1,5, ½ NPT
Ʋ Kabelverschraubung
M20 x 1,5, ½ NPT
Ʋ Blindstopfen
M20 x 1,5, ½ NPT
Ʋ Verschlusskappe
½ NPT
Wire cross-section (spring-loaded terminals)
Ʋ Massive wire, stranded wire
0.2 … 2.5 mm² (AWG 24 … 14)
Ʋ Stranded wire with end sleeve
0.2 … 1.5 mm² (AWG 24 … 16)
