1
GENERAL SAFETY INFORMATION
6
OPTIWAVE 5200 C/F
www.krohne.com
09/2014 - 4001906103 - AD IECEX OPTIWAVE 5200 R03 en
1.5 IECEx nameplates
Signal converter housing (compact and remote (field) versions)
Figure 1-1: Nameplate on the signal converter housing (compact and remote (field) versions)
1
Approval logo
2
IECEx certification agency code
3
Types of device protection including approved Gas Groups and temperature classes (T6...T4 or T3 or T2 - depends on
the antenna type) and equipment protection level
Types of device protection including approved Dust Groups, maximum surface temperature degree of ingress protec-
tion (if fitted with the appropriate cable glands) and equipment protection level
4
4...20 mA passive - HART output option (Ex ia or Ex ic approvals):
4...20 mA passive - HART output option (Ex ia or Ex ic approvals):
4...20 mA passive - HART output option (Ex ia or Ex ic approvals):
4...20 mA passive - HART output option (Ex ia or Ex ic approvals): Intrinsically-safe circuit data
4...20 mA passive - HART output option (Ex d ia or Ex ia tb approvals):
4...20 mA passive - HART output option (Ex d ia or Ex ia tb approvals):
4...20 mA passive - HART output option (Ex d ia or Ex ia tb approvals):
4...20 mA passive - HART output option (Ex d ia or Ex ia tb approvals): Maximum voltage in accordance with EN 60079-
0. Refer to
6
for the input voltage range.
Fieldbus (FF or PROFIBUS PA) options:
Fieldbus (FF or PROFIBUS PA) options:
Fieldbus (FF or PROFIBUS PA) options:
Fieldbus (FF or PROFIBUS PA) options: Entity or FISCO power supply parameters
5
4...20 mA passive - HART output option:
4...20 mA passive - HART output option:
4...20 mA passive - HART output option:
4...20 mA passive - HART output option: Minimum waiting time after power-off before it is safe to open the terminal
compartment
6
Cable entry type and size (M20×1.5 or
½
NPT)
7
Input voltage range and maximum current (4...20 mA passive - HART) / basic current (FF or PROFIBUS PA)
